Rossano Sand Wetwall

£121.68 (inc. VAT)
You will earn 121 points with this purchase
Rossano Sand Luxury Wetwall Panels

Rossano Sand Wetwall Panels are a waterproof decorative high pressure laminate  with a D4 rated waterproof glue-line and a balancing laminate on the reverse.. Available in a wide selection of colours and textures designed to complement any area and can be used for the following applications, Shower Panels , Splashbacks & Vanity Units. With gloss or textured finishes, we offer a range of natural stone, precious stone and marble effects that are easy to install, highly resistant to mould and very durable.

Please see spec below:-
  • Colour - Rossano Sand
  • Height - 2400mm
  • Widths - 590mm, 900mm & 1200mm
  • Thickness - 11mm 
  • Finish - Matt
Key benefits of Natural wetwall panels: 
  • Quick and easy to install
  • No grout, easy to clean, low maintenance
  • Discreet, watertight Hydrolock joint
  • Timeless colours and textures

Installation Guide
Tongue & Groove Detail


When cutting the panels with a hand saw the decorative face should be facing upwards. When cutting with a jigsaw or circular saw were the blade guts down the decorative face should be facing downwards.

A 2-3mm clearance should be left where pipes or fittings come through the panel even where collars are to be fitted. The clearance should then be filled with Wetwall silicone sealant.

If a Wetseal is not being fitted then a 3-4mm gap should be left between the bottom of the panel and the shower tray or bath by using packers when fixing panels. The gaps should then be sealed using Wetwall silicone sealant. Wetwall silicone sealant should also be used in all the corner and capping profiles.

The panels can be fixed to most surfaces using Wetwall adhesive, providing they are sound and free from loose particles.
The panels can also be fixed directly onto existing tiling providing they have been de-greased.

Fittings and shower attachments can be fixed directly to the panels using suitable fixings. Heavier items such as sanitary ware and accessible furniture will require the provision of additional support behind the panels.


Wetwall panels can be cleaned using normal soap, water and a soft cloth. It’s best to rinse the panels first and then clean off the excess water with the squeegee. Wiping down the laminate surface after every use will help to prevent the build up of limescale and residue. To achieve a streak free finish, remove any remaining water using a high quality microfibre cloth. Pay special attention to areas of exposed sealant, these should be wiped clean to prevent the build-up of dirt which, in extreme cases, may promote mould/fungus growth.

Abrasive cleaners should NEVER be used. The use of “wash and go” cleaners should be avoided as they have a high acidic content which – over time – may cause damage or discoloration to the surface of the panels. Do not allow paint stripper, nail varnish, spirits, dry cleaning agents, w.c. cleaners or bleach to come in to contact with the panel surface.
product review overlay image

Customer reviews

No reviews left yet
Write a review

No reviews have been left for this product, be the first to leave a review
Product Code: